Licensed & Insured · Locally Owned · Free Inspections Call (210) 504-1295
W Wannamaker Roofing San Antonio's Trusted Roofer
· 7 min read

Copper vs Aluminum vs Galvanized Flashing | Wannamaker

If your roof is leaking, there's roughly a 70% chance the problem isn't your shingles — it's your flashing. Flashing is the thin metal installed wherever your roof meets a wall, chimney, skylight, vent pipe, or valley. It's the last line of defense against water intrusion, and in San Antonio's climate — where thunderstorms dump two inches of rain in thirty minutes and summer heat warps cheaper materials — flashing choice matters more than most roofers will tell you.

The three most common flashing materials are copper, aluminum, and galvanized steel. Each has a legitimate use case. But they are not interchangeable, and choosing the wrong one can cost you thousands in premature repairs. Let's break down the real differences.

Galvanized Steel Flashing: The Workhorse

Galvanized steel is steel coated with a layer of zinc to resist corrosion. It's the most commonly installed flashing material in residential roofing across San Antonio and the Hill Country, and for good reason: it's affordable, rigid, and easy to work with.

Pros

  • Cost. Galvanized flashing typically runs $2–$5 per linear foot installed — the most budget-friendly option by a wide margin.
  • Rigidity. It holds its shape well, which matters around chimneys and step flashing where you need precise bends that stay put.
  • Availability. Every roofing supply house in San Antonio stocks it. No special orders, no delays.

Cons

  • Rust. That zinc coating doesn't last forever. In San Antonio's humidity and heat cycles, galvanized flashing typically starts showing rust in 15–20 years. Once the zinc is gone, the steel underneath corrodes fast.
  • Galvanic corrosion. If galvanized steel contacts copper or certain treated lumber, it can corrode much faster than expected. This is a real issue with pressure-treated fascia boards.
  • Lifespan mismatch. If you're putting a 30-year asphalt shingle roof on your home, galvanized flashing may need replacement before the shingles do. That means tearing up finished work to access it.

Our take: galvanized is fine for budget-conscious projects and areas that are easy to access later. But for critical areas like chimney flashing and roof-to-wall transitions, it's worth spending more.

Aluminum Flashing: Lightweight and Corrosion-Resistant

Aluminum is lighter than steel, naturally resistant to corrosion, and easy to bend and form on-site. It's the go-to flashing material for many production roofers.

Pros

  • Corrosion resistance. Aluminum forms a natural oxide layer that protects it from rust. In San Antonio's climate, aluminum flashing can last 25–35 years without significant degradation.
  • Weight. About one-third the weight of steel, which matters less structurally and more practically — it's easier for installers to handle on a steep roof.
  • Paintable. Aluminum takes paint well, so it can be color-matched to your roof or trim.
  • Moderate cost. Typically $4–$8 per linear foot installed, depending on gauge and complexity.

Cons

  • Softness. Aluminum dents easily. Hail that barely scuffs galvanized steel can deform aluminum flashing enough to compromise its seal. Given San Antonio's hail damage repair frequency, this is a real consideration.
  • Galvanic corrosion with masonry. Aluminum in direct contact with concrete or mortar (like a chimney) can corrode over time due to alkalinity. A separation layer or sealant is essential.
  • Thermal expansion. Aluminum expands and contracts more than steel with temperature swings. In a city where roof surface temperatures hit 160°F+ in July, fastener holes can elongate over decades.

Our take: aluminum is a solid middle-ground choice for most residential applications — especially drip edges, valleys, and vent pipe collars. Just be cautious using it around masonry without proper isolation.

Copper Flashing: The Premium Option

Copper is the gold standard of flashing materials (pun intended). You'll see it on historic homes in Alamo Heights, King William, and Monte Vista — and for good reason.

Pros

  • Longevity. Copper flashing lasts 70–100+ years. It outlasts every roofing material it's paired with, often by decades.
  • Self-healing patina. As copper ages, it develops a green patina (verdigris) that actually protects the metal underneath. Unlike rust on steel, this patina is a feature, not a failure.
  • Malleability. Copper can be soldered into watertight joints — something you can't do with aluminum or galvanized steel. For complex chimney flashing and custom work, soldered copper is unbeatable.
  • Aesthetics. Nothing else looks like copper. On a slate roofing or tile roofing installation, copper flashing elevates the entire look.

Cons

  • Cost. Copper flashing runs $15–$30+ per linear foot installed. On a complex roof with multiple penetrations, chimney crickets, and valleys, the flashing cost alone can add $2,000–$5,000 to a project.
  • Theft. It sounds absurd, but copper theft from roofs and construction sites is a real problem in the San Antonio metro area. Finished installations are generally safe, but materials left on-site during a project need to be secured.
  • Galvanic corrosion with other metals. Copper is highly reactive with aluminum and galvanized steel. If copper runoff drips onto aluminum gutters, those gutters will corrode prematurely. Every metal component in the system needs to be considered.

Our take: if you're investing in a premium roof — standing seam metal, tile, or slate — copper flashing is worth every penny. The upfront cost is high, but you'll never replace it. For standard asphalt shingle roofs, it's usually overkill unless you're flashing a stone or brick chimney you want done right once.

Quick Comparison Table

Here's how the three stack up for San Antonio residential roofing:

  • Galvanized Steel: $2–$5/ft installed · 15–20 year lifespan · Best for budget projects and accessible areas
  • Aluminum: $4–$8/ft installed · 25–35 year lifespan · Best for drip edges, valleys, and most residential applications
  • Copper: $15–$30+/ft installed · 70–100+ year lifespan · Best for premium roofs, chimneys, and historic homes

What We Actually Install (and Why)

On most San Antonio roof replacement jobs, we use aluminum flashing for drip edges and valleys, and either aluminum or copper for chimney and wall flashing depending on the homeowner's budget and roof type. We rarely use galvanized anymore — not because it's bad, but because the cost difference between galvanized and aluminum is small enough that the extra 10–15 years of life easily justifies the upgrade.

For homes in Stone Oak, Boerne, and other Hill Country communities with premium roof systems, we recommend copper chimney flashing as a default. The investment protects one of the most leak-prone areas of the roof for the life of the home.

The Mistake Most Roofers Make

Here's the contrarian truth: the flashing material matters less than the installation. We've torn off roofs where expensive copper flashing was installed poorly — no kick-out flashing at wall terminations, counter-flashing embedded in crumbling mortar, step flashing nailed through the face instead of the top edge. All of that copper was worthless because water found a path behind it.

Conversely, we've seen well-installed galvanized flashing last 25 years because the installer understood water management, used proper overlaps, and sealed the right joints. Material selection is important, but it's the second most important decision. The first is hiring a crew that knows how to install it.

Not Sure What's on Your Roof?

Most homeowners have no idea what type of flashing is on their roof — or whether it's still doing its job. We check every piece of flashing during our free roof inspection. If something's corroded, lifted, or improperly installed, we'll show you photos and explain your options — no pressure, no sales pitch. Schedule yours today.

Bottom line: don't let a roofer gloss over flashing as an afterthought. It's the most failure-prone component on any roof, and the material you choose — combined with proper installation technique — determines whether your roof stays dry for 15 years or 50. Ask your contractor what they're using and why. If they can't give you a straight answer, that tells you everything you need to know.

Ready for a straight answer on your roof?

Free, no-pressure inspection with photo-documented findings. Most inspections done within 48 hours.